Postioner DVC6020

FSDVC6020-105/G160B/M20/ATEXFP/SP065

• • PWB Assembly : AD Advanced Diagnost
• • Input Signal : 4-20 mA dc(Pt to Pt)
• • Action : Double
• • Hazardous Area Approval : ATEX/LCIE XP
• • Actuator Type : All Others
• • Stem/Shaft Motion : Stem Ext w/ Incr Sig
• • Output Gauges : 0-160 PSI/BAR
• • Supply Gauge : 0-160 PSI/BAR
• • Conduit Adptr/Cable Gland : 1/2nptMale,M20X1.5 F
• • Relay Type : Type "A"
• • Service Temperature : -40 to +85 deg C.
• • Max Supply : 145 psig
• • Supply Pressure : 65 psi
• • Housing Material : Aluminum
• • Relay Elastomers : Nitrile
• • Relay Bleed : Std Bleed
• • Term. Box Assy : Std.



FSMTGDVC-B109F

• • Factory/Field Mounting : Field Mtg
• • Mounting for : DVC6020
• • For Mounting On : Sz60/4.06 to 6.
• • Actuator Type : 585C



PSPL-200

• • Size : All sizes
• • Processing Level : Level 2
• • Standard Processing : Yes
• • Fisher Mfg Cert. of Con. : Yes
• • C of C Matl ASME/ASTM bou : Yes
• • C of C ASME/ASTM : Yes
• • Assy Test Rpts : Yes
• • Cert. of Conformance : Yes

Process Regulator 95H

• • Application: Pressure Reducing
• • Size and Type: 2 Inch 95HP
• • End Connect: DN 50 PN 63 / FORM C
• • Body Material: Steel
• • Trim Material: 416 SST
• • HDisk/Seat Material: Nitrile
• • Actuator Spring Range: 15-100 psig
• • Set Pressure: 6 kg/cm2g
• • Actuator Upper Casing Matl.: Steel
• • Diaphragm Matl.: Neoprene
• • Max. Inlet/Outlet Pressure Rating: 600 PSIG ( 40.8 bar)
• • Wide Open Flow Coefficient: 12.5 Cv
• • Inlet Pressure (P1); [kg/cm2g]:
• - Norm: 26.500, Max: 28.030
• • Outlet Pressure (P2); [kg/cm2g]:
• - Norm: 6.000, Max: 6.000
• • Temperature (T); [deg C]:
• - Norm: 25.000, Max: 87.000
• • Gas Flow Rate (Q) [Nm3/h]:
• - Norm: 1867.906, Max: 2353.582
• • Sizing Coefficient, Cv (Cv):
• - Norm: 5.068, Max: 6.679
• • Valve/Reg LpA (SPL) (Valve/Reg LpA) [dB(A)]:
• - Norm: 83.8, Max: 86.8

for Sizing Calculation click here.

Controller 4160K

FS4160K-221/G17

• • Instrument Type : 4160K
• • Control Mode : Prop + Reset
• • Set Point Adjustment : Standard
• • Sensing Element Style : Bourdon Tube
• • Sensing Element Material : 316 SST
• • Sensing Element Range : 0/1,000 PSI
• • Output : 3-15 PSI / 0 - 18
• • Action : Direct
• • Set Point Dial Units : Standard
• • Supply Gauge : 0-30 PSI/KGCM2
• • Output Gauges : 0-30 PSI/ KGCM2
• • Ambient Temp Limits : Std
• • Supply/Output Gauge Conn. : Brass



FSMTGW-139F

• • Mounting Type : 4150K-66KMtg
• • Mounting Method : Pipestand
• • Supply Regulator : FS67CFR-362
• • Regulator Mounting : Stl/Pl Nippl
• • Factory/Field Mounting : Field Mtg



PSPL-200

• • Size : All sizes
• • Processing Level : Level 2
• • Standard Processing : Yes
• • Fisher Mfg Cert. of Con. : Yes
• • C of C Matl ASME/ASTM bou : Yes
• • C of C ASME/ASTM : Yes
• • Assy Test Rpts : Yes
• • Cert. of Conformance : Yes

Regulator 67CFR

FS67CFR-239

• • Desc.:1/4 Inch 67CFR Regulator;PED SEP
• • 1/4 Inch 67CFR Regulator
• • Pilot/Regulator Body Matl : Aluminum
• • Internal Relief : Yes
• • Filter material : 5 Micron Polyethylen
• • Drip Pot : Yes Inlet
• • D.O. Reg Spring Range : 0 to 125 psig
• • Size : 1/4 Inch
• • End Connections : NPT
• • Body Tapping : Both Outlets
• • Adjusting Screw : Square
• • Bonnet Style : Plain 1/8 In
• • Gauges : 0-160 psig
• • Diaphragm Material : Nitrile
• • Trim Material : Brass
• • Drain Valve Matl : Brass
• • Plug : Nitrile
• • Stem Material : Brass
• • Inlet Pressure : 250 psi

Regulator 67CFR

FS67CFR-226

• • Pressure Reducing
• • 1/4 Inch 67CFR Regulator
• • Body Style:
• - End Connect: NPT
• - Material: Aluminum
• - Body Tapping(inlet/outlet): Both Outlets
• • Actuator Spring Range: 0 to 125 psig
• • Diaphragm Matl: Nitrile
• • Filter Material: 40 Micro Cel
• • Internal Relief: Yes